Routeros Mikrotik Tutorial - Mikrotik RouterOS Versi 6.38.3 Apa Yang Baru?

Beberapa waktu yang lalu Mikrotik.com telah merilis Mikrotik RouterOS 6.38.3 untuk versi "Current". Dari gosip yang diperoleh, versi tersebut dirilis pada tanggal 7 Februari 2017. Lalu, Apa yang gres di Mikrotik RouterOS versi 3.68.3??

Beberapa perbaikan dibenamkan pada Mikrotik RouterOS versi 6.38.3. Perbaikan itu diantaranya ialah pada bridge, firewall, graphing, hotspot, usb, wireless, dan lain masih banyak lagi. Pada salah satu kasus perbaikan ialah pada bridge. Yang mana tidak mampu membuat dinamic stp port, crash, rstp/stp, dan lain masih ada lagi. Pada winbox juga ditambahkan fitur semacam "add-relay-info", "relay-info-remote-id", dan lain - lain.

Berikut dibawah ini ialah changelog

What's new in 6.38.3 (2017-Feb-07 09:52):

*) bridge - do not add dynamic hardware STP ports if “master-port” is not capable of hardware STP;
*) bridge - fixed rare crash when hardware STP capable interface gets new “master-port” which already is in bridge;
*) bridge - fixed rare situation when port flapping occurs on bridge ports;
*) bridge - fixed STP/RSTP packet receive on all types of bridge ports;
*) bridge - minor improvements in performance when "master-port" is bridge port;
*) capsman - fixed SGI (Short Guard Interval) support;
*) dhcp - do not listen on IPv4/IPv6 client to IPv6 MLD packets;
*) dude - (changes discussed here: http://forum.mikrotik.com/viewtopic.php?f=21&t=116356);
*) firewall - added "fasttrack" dummy rule to "/ip firewall raw" table;
*) firewall - do not show IPv4 “fastpath” as active if “route-cache” is disabled;
*) firewall - fixed import of exported configuration that had updated "limit" setting;
*) graphing - fixed graphing crash when high amount of traffic is processed;
*) hotspot - fixed rare kernel crash on multicore systems;
*) ike1 - fixed responder xauth trailing null;
*) leds - fixed defaults for RBSXT5HacD2nr2;
*) mmips - improved general stability;
*) rb3011 - fixed noise from buzzer after silent boot;
*) switch - fixed crash when trying to configure second master port on the same chipset (RB3011, RB2011, CCR1009-8G-1S+);
*) usb - added missing USB ethernet drivers to arm & tile architecture;
*) winbox - added "add-relay-info" and "relay-info-remote-id" to DHCP relay;
*) winbox - added H flag to "/ip arp" ;
*) winbox - added missing "use-fan2" and "active-fan2" to "/system health";
*) winbox - allow shorten bytes to k,M,G in bridge firewall just like in “/ip firewall”;
*) winbox - do not hide 00:00:00:00:00:00 MAC address in unpublished ARPs;
*) winbox - fixed matching "connection-state=untracked" connections;
*) winbox - fixed typo in “/system resources pci” list;
*) winbox - make "power-cycle-after" show correct value;
*) winbox - updated fan management menu;
*) wireless - added "station-roaming" setting;
*) wireless - update Thailand country frequency settings;